Posts

Syrus 3 & CloudConnect Firmwares (beta)

/in , , /by

Syrus beta firmware releases

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.4.65 (beta)

/in , , /by

Syrus beta firmware release 3.4.65

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.4.61 (beta)

/in , , /by

Syrus beta firmware release 3.4.61

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.4.61 (beta)

/in , , /by

Notice

This firmware upgrade includes Firmware Plugins, this ONLY applies to clients that are not using Pegasus application, it means that certain interactions with some accessories are restricted unless you unlock it with the purchase of a firmware plugin.  If you are a Pegasus Gateway user you don't need to worry about this notice. Please refer to the Firmware Plugins page for more information on these plugins.

Upgrade Commands

  Syrus CC

>SXAFU1http://dctserver.com/otap/f/3f4u61/lite/;syrmag;3620afd5;<

  Syrus CC Plus

>SXAFU1http://dctserver.com/otap/f/3f4u61/scc2/;syrmag;3620afd5;<

  Syrus 3GLC

>SXAFU1http://dctserver.com/otap/f/3f4u61/3glc/;syrmag;3620afd5;<

  Syrus 3

>SXAFU1http://dctserver.com/otap/f/3f4u61/std/;syrmag;3620afd5;<

  Syrus 3GBT

>SXAFU1http://dctserver.com/otap/f/3f4u61/bt/;syrmag;3620afd5;<

  *Upgrade all command:

>SXADUALL3f4u61,1.9.1.5,1.03<
*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Corrections

        • Fixed, the mechanism for restarting the GPS, sometimes the gps task was left disabled after sending ::gps 7 command

Changes

        • Changed, the data structure for managing ECU TPMS doran data

Additions

        • Added, automatic detection of wireless and super sims
        • Added, ECU DID 134 Doran baseline tire pressure
        • Added, ZW9 ECU over pressure warning signal
        • Added, ZX0 ECU over pressure alert signal
        • Added, XAZB command for consulting Doran tire pressure baseline
        • Added, ZY extended tag for Doran Warnings
        • Added, 000 as default phone peer for receiving SMS
        • Added, XAZY command for consulting the Doran tires under warning state

Syrus 3 & CloudConnect Firmwares 3.4.58 (beta)

/in , , /by

Notice

This firmware upgrade includes Firmware Plugins, this ONLY applies to clients that are not using Pegasus application, it means that certain interactions with some accessories are restricted unless you unlock it with the purchase of a firmware plugin.  If you are a Pegasus Gateway user you don't need to worry about this notice. Please refer to the Firmware Plugins page for more information on these plugins.

Upgrade Commands

  Syrus CC

>SXAFU1http://dctserver.com/otap/f/3e4v58/lite/;syrmag;3620afd5;<

  Syrus CC Plus

>SXAFU1http://dctserver.com/otap/f/3e4v58/scc2/;syrmag;3620afd5;<

  Syrus 3GLC

>SXAFU1http://dctserver.com/otap/f/3e4v58/3glc/;syrmag;3620afd5;<

  Syrus 3

>SXAFU1http://dctserver.com/otap/f/3e4v58/std/;syrmag;3620afd5;<

  Syrus 3GBT

>SXAFU1http://dctserver.com/otap/f/3e4v58/bt/;syrmag;3620afd5;<

  *Upgrade all command:

>SXADUALL3e4v58,1.9.1.5,1.03<
*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Corrections

        • Fixed, ECU counters were not added to trips information if the device finished a trip just after a system reset
        • Fixed, a synchronization issue when the graphical array for ECU ttm is greater than the ttm number

Additions

        • Added, OTR tire pressure as new ECU parameter
        • Added, the instruction to restart ECU tires array when a synchronization issue is detected
        • Added, SerialModem class for supporting SatComm and Sigfox with the same object
        • Added, support for sigfox communicator
        • Added, new options to XASM command for supporting sigfox communicator
        • Added, 3 new parameters to gps anti-drift filter: ignition, acceleration and max speed
        • Added, F35 signal for reporting that the GPS data is not arriving
        • Added, a mechanism for executing a GPS electrical reset when filter acceleration criteria are met
        • Added, a mechanism for executing a GPS electrical reset when filter max speed criteria are met

Syrus 3 & CloudConnect Firmwares 3.3.85

/in , /by

Upgrade Command

>SXAFUGW<

Corrections

  • Fixed, jamming detection issue
  • Fixed, The mechanism to get the next photo id, the gps timestamp is used instead

Syrus Firmware 2.1.47

/in /by

Syrus 2 FW 2.1.47 has been officially released! Changes [list icon=”carat-1-e”] [item]Has a new feature that allows switching operators automatically after 5 minutes without registering GSM or GPRS as long as an M2M Cloud Connect SIM Card is detected. “This functionality could be turn on/off via Engineering Command”[/item] [/list] Improvements [list icon=”carat-1-e”] [item]Dedicated counters added…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus Firmware 2.1.41

/in /by

Syrus 2 FW 2.1.41 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, when Satcom mode is activated a not-valid-event is sent by Satcom[/item] [item]Fixed, sometimes the iButton id is not read correctly, this was reflected on the IB tag[/item] [item]Fixed, the unit does not wake up for time when Power Saving Mode ‘I’ is activated[/item]…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 2.9

/in /by

ECU Monitor FW 2.9 Release Notes! Improvements [list icon=”carat-1-e”] [item]Improved, OBDII protocol support for Hyundai vehicles.[/item] [/list] Additions [list icon=”carat-1-e”] [item]Added, parameter to read the status of the seatbelt – for J1939 protocol only.[/item] [item]Added, parameter to read the status of the low lights – for J1939 protocol only.[/item] [/list] Changed [list icon=”carat-1-e”] [item]Changed, the…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus Firmware 2.1.28

/in /by

Syrus 2 FW 2.1.28 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, transmission command for setting the MDT Mode back to normal[/item] [item]XAFP Query command did not return valid information[/item] [item]GPS Improvements on Driving Metric reports[/item] [/list] Improvements [list icon=”carat-1-e”] [item]Improved, communication with remote UDP servers that are added as URLs on the Destination Point[/item]…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here