Product Releases - DCT Support

Syrus 3 & CloudConnect Firmwares 3.4.18

March 18, 2019/in Product Releases, Syrus 3 Firmware /by leo

Notice This firmware upgrade includes Firmware Plugins, this means that certain interactions with some accessories are restricted unless you unlock it with the purchase of a firmware plugin. Please refer to the Firmware Plugins page for more information on these plugins. Firmware 3.4.18 was released alongside the Microcontroller (Interface) FW: 1.9.1.4. Upgrade Command >SXADUALL3y4m18,1.9.1.4,1.03< Corrections…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Microcontroller (Interface) Firmware 1.9.1.4x

March 18, 2019/in Microcontroller/Interface, Product Releases /by leo

Model Microcontroller (Interface) Upgrade Command Syrus 3 Bluetooth (S3GBT-2481) >SIV1.9.1.4T< Syrus 3G+ (S3G-2480) >SIV1.9.1.4T< Syrus 3GLC (SL3G-1645) >SIV1.9.1.4C< Syrus 3 US/EU (SY-2340) >SIV1.9.1.4F< Syrus CloudConnect (SL-1445) >SIV1.9.1.4L< Syrus CloudConnect Plus (SL-1645) >SIV1.9.1.4W< Added 3 new thresholds were added for the Aggressive Curve detection algorithm. New thresholds are S6(100 milli-g), S7(150 milli-g) and S5(200 milli-g)….

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 5.0.12

March 18, 2019/in ECU Monitor Firmware, Product Releases /by leo

Upgrade Command: >SXAEM1ecu_5.0.12< Fixed Fixed, erroneous values on the FAN Status and ABS Status parameters for J1939 protocol Please note that this upgrade can take between 8-10 minutes, so it’s recommended to do the upgrade when the vehicle’s ignition is OFF, and the ECU is powered permanently. An ignition transition would not cause loss but it…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.85

August 24, 2018/in Product Releases, Syrus 3 Firmware /by Jose R.

Upgrade Command

>SXAFUGW<

Corrections

Fixed, jamming detection issue
Fixed, The mechanism to get the next photo id, the gps timestamp is used instead

ECU Monitor Firmware 5.0.11

August 20, 2018/in ECU Monitor Firmware, Product Releases /by leo

Upgrade Command: >SXAEM1ecu_5.0.11< Added Added, Support for the ContiPressureCheck TPMS accessory from Continental Added, Support for the J1939 500kHz CAN networks Please note that this upgrade can take between 13-15 minutes, so it’s recommended to do the upgrade when the vehicle’s ignition is OFF, and the ECU is powered permanently. An ignition transition would not…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.84

August 20, 2018/in Product Releases, Syrus 3 Firmware /by leo

Upgrade Command >SXAFUGW< Upgrade all command (FW, Interface & Bluetooth) >SXADUALL3i3c84,1.9.1.1,1.03< Corrections Fixed, a reference time on i2c thread was causing bluetooth upgrade to fail. Fixed, the mechanism to auto start an upgrade when syrus interface is in boot mode. Fixed, a reference time on i2c thread was causing Input/Output expander to fail. Fixed, MDT…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Microcontroller (Interface) Firmware 1.9.1.1x

August 20, 2018/in Microcontroller/Interface, Product Releases /by leo

The 1.9.1.1X version of the microcontroller was released together with the Syrus 3.3.82 version, Syrus release notes. Model Microcontroller (Interface) Upgrade Command Syrus 3 Bluetooth >SIV1.9.1.1T< Syrus 3G+ >SIV1.9.1.1T< Syrus 3GLC >SIV1.9.1.1C< Syrus 3 US/EU >SIV1.9.1.1F< Syrus CloudConnect >SIV1.9.1.1L< Syrus CloudConnect Plus >SIV1.9.1.1W< Added Added a way to enable/disable the accelerations back log feature…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.77

July 18, 2018/in Product Releases, Syrus 3 Firmware /by Jose R.

Upgrade Command >SXAFUGW< Important – Firmware 3.3.77 replaces firmwares 3.3.59 & 3.3.71, it is important that your devices are upgraded to this stable version, the changes between this release note and the previous one are detailed below in italics. After upgrading the Syrus firmware make sure to upgrade the microcontroller’s (interface) FW – see the…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus IoT Tag Firmware 1.01

June 22, 2018/in Product Releases, Syrus IoT Tag Firmware /by leo

Upgrade Command: >SBTFtag_1.01< Make sure to upgrade the Syrus firmware first, please see the footer for more information Release notes Corrections [list icon=”carat-1-e”] [item]Fixed, a bug related to the reed switch when it was in beacon mode[/item] [item]Fixed, the tag returns to the default TX power when coming from beacon mode.[/item] [/list] Changed [list icon=”carat-1-e”]…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Beta Firmware 2.3.48

June 22, 2018/in Beta Firmware, Product Releases, Syrus 2 Firmware /by leo

Note – this is a public beta release of the Syrus 2 FW. It’s purpose is to test the features mentioned below in its entirety, we welcome any feedback, please write to support@digitalcomtech.com. Upgrade Command: >SXAFU1http://dctserver.com/otap/f/2t3r48/std/;syrmag;3620afd5;< Corrections [list icon=”carat-1-e”] [item]Fixed, the method that calculates the average for analogue interface, it calculated the average when the…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Upgrade Command

Corrections

Contact