Syrus IoT Tag Firmware 0.28

Upgrade Command: >SBTFtag_0.28< Corrections Changes Improvements Additions To configure beacon mode you can send: >SBTC00:07:80:B5:18:751$000000000000000000000XX$-50,300,50,70,50,60,0<, where: 00:07:80:B5:18:75 is the Tag’s MAC Address you want to configure 000000000000000000000, all the configuration parameters set to 0 XX Beacon mode config, possible values between 00-15 – 00 means Normal mode in other words the Tag will not go…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here