Firmware Releases

Syrus 3G, 3G-BT, & CloudConnect Firmware 3.3.43

/in /by

Upgrade Command: >SXAFUGW< This firmware has Syrus firmware plugins enabled, please read more information about this on the following page. Note – after upgrading the Syrus firmware make sure to upgrade the microcontroller’s fw – release notes Corrections [list icon=”carat-1-e”] [item]Fixed, bluetooth tags some times would not receive the commands to upgrade.[/item] [item]Fixed, bluetooth locks…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 4.2.11

/in /by

Upgrade Command: >SXAEM1ecu_4.2.11< Improvements [list icon=”carat-1-e”] [item]Improved, filters were added when the distance came from multiple sources on the bus, avoids wrong distance values in some cases[/item] [/list] Additions [list icon=”carat-1-e”] [item]Added, reading of VIN for OBDII (ISO15765 29 & 11 bits) protocol[/item] [item]Added, reading of Diesel Exhaust Fluid values (DEF Level, DEF Temperature, Total…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G, 3G-BT, & CloudConnect Firmware 3.3.36

/in /by

Upgrade Command: >SXAFU0E< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes serial camera task reported memory full when there was no files in memory, so new photos could not be requested.[/item] [item]Fixed, Lumeway accessory was not properly initialized.[/item] [item]Fixed, sometimes the connection to Syurswatch (diagnostic door) was ended before the Syrus uploaded it’s content.[/item] [item]Fixed, wrong output state…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G, 3G-BT, & CloudConnect Firmware 3.3.25

/in /by

Upgrade Command: >SXAFU0E< Corrections [list icon=”carat-1-e”] [item]Fixed, an issue evaluating internal battery thresholds, it avoided to trigger battery signals.[/item] [item]Fixed, GPS heading out of range error when triggering events.[/item] [item]Fixed, OC tag was returning wrong error codes when J1708 was used.[/item] [/list] Changes [list icon=”carat-1-e”] [item]Changed, Changed, the limit for setting the XAICCS sensibility.[/item] [/list]…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 4.2.0

/in /by

Upgrade Command: >SXAEM1ecu_4.2.0< Improvements [list icon=”carat-1-e”] [item]Improvement, analog sensor signal for fuel level differential[/item] [item]Improvement, overall in communication with the Engine parameters read[/item] [/list] Additions [list icon=”carat-1-e”] [item]Added, dual protocol support with J1708 & J1939 parameters read simultaneously[/item] [item]Added, dual protocol support with J1708 & Mobileye parameters read simultaneously[/item] [item]Added, new protocol for Mobileye accessory[/item]…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.3.23

/in /by

Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes a wrong time of day was delivered to trips after power saving mode.[/item] [item]Fixed, a trip was not ended when the vehicle was stopped without ignition off and without GPS.[/item] [item]Fixed, the OP tag was added in an extended event when DOP tag was configured.[/item] [item]Fixed, counters…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G and CloudConnect Beta Release 3.2.12

/in /by

Syrus 3G beta Release 3.2.12 Upgrade command: >SXAFU1http://190.145.53.3/otap/f/3m2c12/std/;syrmag;3620afd5;< — Syrus CloudConnect beta Release 3.2.12 Upgrade command: >SXAFU1http://190.145.53.3/otap/f/3m2c12/lite/;syrmag;3620afd5;< — The latest Syrus 3G & Cloudconnect versions synchronized all the changes made to the latest stable version of the Syrus 2 [2.3.8], this means all additions, improvements,  and fixes are the same for both Syrus 2 & Syrus…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.3.8

/in /by

Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, Mobileye detection flag was not being set [/item] [item]Fixed, communication timeouts between Syrus and Garmin (error 82) [/item] [item]Fixed, GPS back log (XAKL) was returning the coordinates with wrong values, the latitude and longitude sign was changing [/item] [item]Fixed, Baudrate (XABR) command was being executed when an event was defined…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.2.3

/in /by

Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes the pulse counter value was incremented by one during a system reset  [/item] [item]Fixed, sometimes the GPS module jumps to the future. If this condition is detected a full cold start is executed [/item] [item]Fixed, sometimes the gps speed reported in EV frames while in MDT mode were inconsistent and reported…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G and CloudConnect Beta Release

/in /by

Syrus 3G Beta Release 3.1.27 Upgrade command: >SXAFU1http://dctserver.com/otap/f/3n1p27/std/;syrmag;3620afd5;<   Additions – Acceleration signals and parameters – Support for multiple cameras – Support for Satcom mode 2 (binary) Improvements – Signals for Aggressive driving, possible crash use new algorithm Fixes – Corrected a bug on signals related to sleep mode that were not triggering   Syrus…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here