Tag Archive for: reports

• New Features 

  • Enabled the Trip’s Distance in Custom Trigger Template
    This allows users to view in the alert how far the vehicle had traveled.
    
  • BTG600L Model Integration
    The BTG600L device model has been integrated into the Pegasus platform.
  • WanWay Integration
    Added support for Output 1 control and position request handling for WanWay devices, expanding device management capabilities.
  • Teltonika Analog Sensors Integration
    Integrated analog fuel sensors for Teltonika FMC130 devices, enabling more precise fuel level monitoring.
  • Queclink Network Type Integration
    Added support for displaying and processing the “Network Type” parameter for Queclink devices.
  • Suntech ST4315B BLE Sensor Integration
    Implemented BLE sensor mapping to improve compatibility and data accuracy for the Suntech ST4315B device.
  • Start Trip Time and Trip Distance as selectable common fields within the trigger template configuration
    We have expanded the capabilities of Automation by adding Start Trip and Trip Distance as selectable common fields within the trigger template configuration.
    

• Bugs Fixed

  • Missing IMEI Validation in Forms
    Resolved an issue where installation forms were submitted without an IMEI.
  • Dynamic Collections Geofences Filter
    Corrected a problem where dynamic geofence collections did not allow filtering by user or group.
  • Sensor Display in Temperature Live
    Adjusted the report to show only sensors that have reported recently, improving clarity and reducing noise from inactive sensors.
  • Engine Usage Report
    Fixed inconsistencies in report results when generating by vehicle only versus group filters.
  • Snapshot Report Odometer Conversion and Date Range Data Handling
    Corrected odometer unit conversion and delta calculation issues
  • Trip Analysis Between Fences Report Optimization and Date/Time Format Standardization
    Fixed a memory leak and optimized performance for better stability. Updated the report to use a standardized date and time format for consistency across reports.
  • Segment Configuration
    Fixed an issue that caused errors when creating a new segment configuration.
  • Activity Details Report – Driver Summary Inconsistencies
    Fixed inconsistencies in the driver summary section to ensure accurate and reliable activity reporting.
  • Fuel Consumption Report – Missing Refills and Losses
    Resolved calculation and display issues that prevented fuel refills and losses from appearing correctly.
  • Speeding Report – Updated Speed Conditions
    Refined the speeding conditions to provide consistent and accurate evaluation of speed thresholds.
  • Temperature History Report – Missing Temperature Records
    Fixed an issue where some temperature readings were not being displayed.
  • Entity Summary Report – Missing Vehicle Properties
    Restored missing fields such as VIN, license plate, color, and brand.
  • Snapshot Report – Improved Hourmeter Logic
    Added a hierarchical logic based on counter prioritization to deliver more accurate Hourmeter data.
  • Engine Dashboard Report – Corrected Date Format for Spanish Language
    Previously, the exported report showed invalid date values. The date formatting has now been corrected to ensure proper display and compatibility across spreadsheet tools.

Click here for prior release notes

New Features ⭐️

• Maintenance Notification Banner in Pegasus
  • A new notification banner will be displayed to administrators 72 hours before scheduled maintenance. Key behaviors:
    • Banner includes a confirmation button to acknowledge the message
    • Banner will automatically disappear after confirmation
    • During active maintenance, the banner will remain visible and disappear once maintenance is complete
  • 
• QR Code for Location Sharing in Tracking: We’ve added a new feature to the tracking module that allows users to generate and share a QR code containing the entity’s location. This makes it easier and faster to share location information with others using a simple scan.
  
  

Click here for prior release notes

• New Features ⭐️

  • Logo Group Support in Pegasus Login: When accessing Pegasus via a logo group URL, the corresponding logo group is now displayed in the main menu upon login.
  • Primary Group Selection for Assets: Added an option to set a primary group for assets, enabling clearer organization and reporting.
    
  • Geofence Creation Date Display: The geofence editor now shows the creation date for better tracking and auditing.
    
  • Alert Email Enhancements: Alert emails now include:
    • The event generated by the device
    • The event received by the server
    • The alert delivery confirmation
      
      

• Bug Fixes

• • Geofence Coordinates Fix: Corrected an issue where latitude and longitude were inverted when updating a geofence.

• • Invalid Center ID Message: Resolved an error where updating a geofence would incorrectly display: “Not Valid Center ID”.

• • Posted Speed Limit Report Performance: Fixed performance issue where the report took too long to complete for 2 weeks and 150 vehicles.

• • Incident Report – Driver Summary Tab: Corrected a mismatch in data shown for vehicles without drivers, ensuring consistency between driver and vehicle summaries.
  • Risk Factors report: Resolved timeouts when generating the report to ensuring faster and more reliable performance.
  • Geofences: Fixed an issue preventing geofences from being relocated.
  • Trips: Corrected the way trips are visualized for Bluetooth Tags and Satcom devices.
  • Third party integrations: Fixed an integration issue with the Bluetooth Relay via Expanded Output 1 on the Queclink GV58LAU device.
  • Email alert: Fixed a bug in email alerts where the trip link redirected to an incorrect trip view.

Click here for prior release notes

• New Features ⭐️

  • PDF Export Functionality for Speeding, Distance/Time – Fuel Cost Estimator and Daily Counters Reports: Users can now export detailed reports in PDF format. Note that exports are limited to a maximum of 120 pages.
  • Added PGN “feca” to the Ecu profile v2: Enabled the ECUv2 device to recognize and process the new PGN “feca” message type for enhanced vehicle data communication.
    
  • Enhanced ECU Profile v2 with import/export functionality: Users can now export and import ECU configuration data, facilitating easier device setup and data management across environments.
    
  • Integrated Meitrack fields and input/output handling: Added support for additional Meitrack device fields and improved the integration logic for processing input data and generating outputs.
    
  • Implemented Custom Login Pages configurable per Group: Allows each user group to have a tailored login page, enhancing branding and user experience for different customer segments.

• Bug Fixes

  • Cycle Violation Trigger: Resolved an issue where the trigger activated based solely on driving time. It now correctly fires when the maximum total work time is exceeded.
  • Working Hours Report (HoS) Report Generation: Fixed an issue preventing the successful generation of the HoS Report.
  • Incident Report Generation: Resolved a bug that blocked the creation of Incident Reports.
  • Collision Detection Mapping for Teltonika FMC920: Corrected the mapping logic for possible collision events (coldet), ensuring proper event interpretation.
  • Fixed issue where vehicle tooltip did not display engine error: Resolved a bug preventing engine error information from showing in vehicle tooltips on the tracking interface.
  • Corrected maps zoom behavior after selecting geofence type: Fixed an issue where the map would unexpectedly zoom out after users chose a geofence type during creation.
  • Resolved issue with accumulator triggers not firing: Accumulator-based triggers are now reliably activated as expected under defined conditions.
  • Fixed SIM cards loading issue in Organization’s SIMs section: Addressed a problem where the SIM cards list failed to load properly within the organization management UI.
  • Adjusted output 3 configuration for GV58LAU/CEU devices: Corrected the settings for output port 3 on GV58LAU/ CEU device models.
  • Corrected event handling for Meitrack T711L, T399L: Fixed errors related to event data processing specific to the Meitrack T711L and T399L device model.
  • Fixed Alert Report to correctly display asset Hours of Service (HoS): Corrected the display of asset HoS data in alert reports to ensure accurate reporting.

• Improvements

  • HoS Server improve error handling: The HoS server now automatically restarts upon encountering errors, improving service reliability.
  • Scheduled Report Code improved: Optimized the report generation logic to avoid producing PDFs or CSVs unless the user explicitly selects those formats.

Click here for prior release notes

• Organization

  • Vehicles – Added Primary Group selector for basic user with groups.assets scope in write
    

• Raw Data

  • Added HDOP y SV fields in the filters

• Geofences

  • Collections – Improve visualization of geofences when selecting the collection (minimum 100 geofences)

    

• General

  • Adjusted the HoS terms in Tracking and RawData

• Reports

  • Alert Report
    • Added the speed reported at the time the alert was generated
    • Fixed the report that was not loading all the user’s alerts
    • Fixed the schedule report that was not loading the alerts of the current day
  • Trip Report – Added in the Resume, the time the first trip started and the time the last trip ended

• Third-Party Devices

  • Integrated the output management for Concox JM-VL110C
  • Asset Solar – The battery field received from the sensor K7800 was adjusted from mV to percentage

    

• Tracking

  • In the entities filter, an option in the Group Tab was added to exclude the assets of the selected groups.
    
  • Fixed duplicated input filter for Czech language
  • Adjusted the battery level for Concox JM-LL303
  • Added the battery level for beacons sensors
    

Click here for prior release notes