Firmware Releases

Microcontroller (Interface) Firmware 1.9.0.4x

/in , /by

Upgrade Command: Model Microcontroller (Interface) Upgrade Command Syrus 3 Bluetooth >SIV1.9.0.4T< Syrus 3G+ >SIV1.9.0.4T< Syrus 3GLC >SIV1.9.0.4C< Syrus 3 US/EU >SIV1.9.0.4F< Syrus CloudConnect >SIV1.9.0.4L< Syrus CloudConnect Plus >SIV1.9.0.4W< Syrus 3GLC (SL3G) Important Announcement It is important to update the interface of the Syrus 3G LC models to this fw 1.9.0.4C as it fixes a critical…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.59

/in , /by

Upgrade Command: >SXAFUGW< This firmware is exclusively to Pegasus Gateway owners. Note – after upgrading the Syrus firmware make sure to upgrade the microcontroller’s fw – release notes Corrections [list icon=”carat-1-e”] [item]Fixed, ECU ambient temperature and ECU oil temperature were decoded incorrectly.[/item] [item]Fixed, the group 5 for IX tag was only added when there was…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 5.0.3

/in , /by

Upgrade Command: >SXAEM1ecu_5.0.3< Fixed [list icon=”carat-1-e”] [item]Improved, In J1708, the condition that checks if there is activity on the bus before sending the request message to the bus, this fixes potential collisions between the packets sent by the ECU and the J1708 wire[/item] [item]Improved, In J1708, the parameters that are requested to the vehicle, are…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.3.42

/in /by

Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes driving metrics were calculated with wrong speed values.[/item] [item]Fixed, the ECU monitor task did not read parameters if the application failed sending the ECU protocol command.[/item] [item]Fixed, wrong specific counter values were added to trips if the value was edited by taip command.[/item] [item]Fixed, the signals associated…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.55

/in /by

Upgrade Command: >SXAFUGW< This firmware is exclusively to Pegasus Gateway owners. Note – after upgrading the Syrus firmware make sure to upgrade the microcontroller’s fw – release notes Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes driving metrics were calculated with wrong speed values.[/item] [item]Fixed, bluetooth device was not restarted when gap mode returned no valid mode, it…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 4.3.0

/in /by

Upgrade Command: >SXAEM1ecu_4.3.0< Fixed [list icon=”carat-1-e”] [item]Fixed, under certain conditions after electrical resets the ECUs became unresponsive, once found all the internal LEDs of the ECU would be ON.[/item] [item]Fixed, sometimes the ECUs were not detected by Syrus, only on physical reset would it begin reporting again.[/item] [/list]   Please note that this upgrade can…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Microcontroller (Interface) Firmware 1.8.1.7x

/in /by

Upgrade Command:   Model Microcontroller (Interface) Upgrade Command Syrus 3 Bluetooth >SIV1.8.1.7T< Syrus 3G+ >SIV1.8.1.7T< Syrus 3 US/EU >SIV1.8.1.7F< Syrus CloudConnect >SIV1.8.1.7L< Syrus CloudConnect Plus >SIV1.8.1.7W< Syrus 3G LC (SL3G) Read below Syrus 3GLC (SL3G) Important Announcement It is important to update the interface of the Syrus 3G LC models to the 1.9.0.4C version as…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus IoT Tag Firmware 0.28

/in /by

Upgrade Command: >SBTFtag_0.28< Corrections [list icon=”carat-1-e”] [item]Fixed, the LED, Buzzer, reed switch, and button flags were not activating when setting them individually.[/item] [/list] Changes [list icon=”carat-1-e”] [item]Changed, now the button and the reed switch will always stay active even if the user deactivated it to use beacon mode.[/item] [item]Changed, now the tag can be configured using…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.3.37

/in /by

Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, ECU multiple error codes was returning wrong information. [/item] [item]Fixed, the SIM card was electrically restarted after system reset if the no-GSM time was reached. It caused the application to not start correctly when automated reset AR was configured.[/item] [item]Fixed, pulse counter was returning 0 when it was…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus IoT Tag Firmware 0.25

/in /by

Upgrade Command: >SBTFtag_0.25< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes the light value was not read correctly when pressing button to wake up the Tag.[/item] [/list] Changes [list icon=”carat-1-e”] [item]Changed, added two beeps when the tag is configured[/item] [/list] Improvements [list icon=”carat-1-e”] [item]Improved, persistent memory storage in case tags recovers from an unexpected restart[/item] [item]Improved, secure over…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here