Entries by

Pegasus Stable Release 1.63

We have stabilized a new version of the Gateway, 1.63.  In order to see your current Pegasus version, please visit the “System” tab under Gateway Management. If you are a developer who uses the API extensively, please remember to read the API release notes before proceeding. Gateway owners may request to have their site upgraded to…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.3.23

Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes a wrong time of day was delivered to trips after power saving mode.[/item] [item]Fixed, a trip was not ended when the vehicle was stopped without ignition off and without GPS.[/item] [item]Fixed, the OP tag was added in an extended event when DOP tag was configured.[/item] [item]Fixed, counters…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Pegasus Stable Release 1.52

We have stabilized a new version of the Gateway, 1.52.  In order to see your current Pegasus version, please visit the “System” tab under Gateway Management. If you are a developer who uses the API extensively, please remember to read the API release notes before proceeding. Gateway owners may request to have their site upgraded to…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G and CloudConnect Beta Release 3.2.12

Syrus 3G beta Release 3.2.12 Upgrade command: >SXAFU1http://190.145.53.3/otap/f/3m2c12/std/;syrmag;3620afd5;< — Syrus CloudConnect beta Release 3.2.12 Upgrade command: >SXAFU1http://190.145.53.3/otap/f/3m2c12/lite/;syrmag;3620afd5;< — The latest Syrus 3G & Cloudconnect versions synchronized all the changes made to the latest stable version of the Syrus 2 [2.3.8], this means all additions, improvements,  and fixes are the same for both Syrus 2 & Syrus…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G and CloudConnect Beta Release

Syrus 3G Beta Release 3.1.27 Upgrade command: >SXAFU1http://dctserver.com/otap/f/3n1p27/std/;syrmag;3620afd5;<   Additions – Acceleration signals and parameters – Support for multiple cameras – Support for Satcom mode 2 (binary) Improvements – Signals for Aggressive driving, possible crash use new algorithm Fixes – Corrected a bug on signals related to sleep mode that were not triggering   Syrus…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 2 Firmware 2.1.64

Corrections [list icon=”carat-1-e”] [item]Fixed, ECU speed, fuel and weight parameters were not correctly updated. These parameters could be updated with out of range values. [/item] [item]Fixed, sometimes the unit did not register on GPRS after ending power saving mode. A control timer to check GPRS register was added in order to restart the application when…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Pegasus Stable Release 1.43.1

There’s a new stable release of Pegasus – 1.43.1 Additions [list icon=”carat-1-e”] [item]Daily Counters Report – Analysis of the counters[/item][/list] [list icon=”carat-1-e”][item]24 Hr Report – Detail report for vehicle’s location throughout the day[/item] [item]Occurrence Report – Count of how many times a code occurred[/item] [item]Permanence Report – How long a vehicle stayed inside a geofence[/item]…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Satcom Firmware 15

Satcom firmware release Notes Binary Mode Added, this reduces the regular EV messages size (with NO extended tags) to binary size – from 63 bytes down to 21 bytes. To enable this new binary mode you can send the following command: >SXASMM2< Once enabled the mechanism works automatically. Make sure your Syrus 2 is upgraded…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 3.7

ECU Monitor FW 3.7 Release Notes! Corrections [list icon=”carat-1-e”] [item]Bug corrected from versions  3.4-3.6 that was causing issues with the Total Fuel Used Parameter[/item] [item]Fixed, erroneous values for the Total Distance Odometer and Liters consumed could some times be reported in protocols J1939, FMS, or J1708[/item] [/list] Improvements [list icon=”carat-1-e”] [item]New algorithm for the Analog…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus Desk Update

There’s a new version of SyrusDesk available for download. We recommend this version for every client that is programming Syrus3G devices. Visit our Download page for more information…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here