Tag Archive for: organization

• Accessories

  • Fixed showing event media

• Alerts

  • Added HoS detail information in the alert dialog. The information includes when was the last pause, how long the entity was working without pauses, and the segment setup.
  • Fixed alerts that can not be reopened.
  • Fixed the ‘Notices’ button on the left menu.
  • Fixed responsive layout in the alert dialog.

• API

  • Fixed POST method in reversegeo API that returned an error when the request included the types parameter.
  • The exited condition was not triggered correctly (not implemented)
  • RT: Surfsight
    • Added label for passenger unbelted.
    • Improvements on the events reception. The generated events are receiving correctly in Pegasus, except the events that occur at the same time, we continue working to fixes this case.
  • RT: Traffilog – Reviewed the deployment when not using partitions
  • RT: CMS – Fixed events that do not appear in the dashboard.
  • RT: FleetUp – Improvements to handle trips in progress
  • Documentation and hand off of tasks for retransmitters to devops.
  • Third-Party Device – Supported commands response in devconsole (Ruptela)
  • Fwd :Comsatel – Added validation for null values
  • Fwd:Wisetrackemsa – Updated the protocol
  • Changlogs – Added the position of the ibutton array was removed the asset
  • Queclink GV75W – Added “battery.level” field for battery percentage
  • GV310LAU – Updated the ibutton field “ibutton.authorized.state” for “ibutton.authorized.state.enum”

• General

  • Added more czech translations (edited)

• Geofence

  • Fixed editing a property that has a default value in the JSON schema.

• Tracking

  • Fixed the platform freezing when zooming the map in an area with many devices
  • Supported new embedded inputs and outputs (input 4-7 and output 3-4)
  • Fixed fuel liter values ​​for Syrus 4 devices with technoton fuel sensor and serial expander
  • Fixed the fuel level percentage (when tank volume is at 100%)
  • Fixed the default values ​​of the safe zone to prevent sending the command to deactivate the exit. When the user sets a save zone, there are three options for the action: enable, disabled, and no action.
    

• Organization

  • Added a validation to prevent a user from trying to change another user’s email.
  • Fixed trip setup method for Ignition Only in Syrus 4 and non-Syrus devices. Devices that did not support the tracker method will display “Method not supported for device”.
  • When a user does not have their preferences completed, a message was added when trying to change some scope.
  • The “Copy User” button was hidden for Staff users, to avoid copying them.
  • Fixed the creation of user when the preferences are empty.
  • Added dynamic group by assets.

• Reports

  • Reports Scheduled – Fixed  when an admin/basic user creates or deletes a report the page is automatically updated, and added pagination
  • Fixed showing favorite reports when refreshing the page
  • Fuel Report – Fixed the code shown on the user interface
  • Snapshot Report-  Will show all vehicles that belong to the selected group, show zero values ​​for vehicles that don’t have data
  • Visits, Fuel Consumption, Speed Durations, Activity Details, Speeding reports – Added columns with the IButton and driver name  in summary and details
  • HoS Report – Will display a warning when the device associated with the vehicle does not have segment configuration
  • Scheduled reports – Fixed reports not received when scheduled around 00:00 UTC on the first of the month
  • New Report “iButton History ” – Show the historical association of iButtons with vehicles and assets in the last 12 months
  • Fuel Consumption – Fixed distance equals zero when the vehicle had trips.
  • Posted Speed Limits – Fixed show the vehicle incident. The report was generated without incident when the vehicle was speeding.
  • Speed Durations – Fixed events occurring more than once on the same geofence. Fixed the column max speed that wasn’t show any value and geofence id column was not showing the correct id.
  • Fuel Report – Changed the position of the tooltip in the Fuel Level Chart (Tab Analysis)
  • In the main view of the reports, it was fixed then name of the Cycle and HoS report
  • Speeding (Schedule report) – Added value 0 by default for the “minutes” field
  • Added icon for the iButton History Report
  • Temperature History – fixed display negatives values in the chart. Now the report have a threshold limit from -9°C  to 99 °C.
  • Temperature History
    • added a geofence column in Details tab
      
    • added location in the tooltip chart on Overview tab

      

• Third-Party Services

  •  Fixed position request commands for Lynx
  •  Fixed the activation and deactivation of outputs for Ruptela HCV5
  •  Added customized ignition config.engine.ignition.status for Ruptela HCV5
  •  Updated field ibutton.authorized.state for ibutton.authorized.state.enum in Queclink GV310LAU

• Tracking

  • Added a filter that allows filtering on any group and entity property.

    

• HoS

  • Improvements:
    • The colors of the bars were changed depending on the state of the entity, ex: light blue when the entity is resting or taking a break, light red when the entity is overworked and light green when the entity is working without getting overworked
    • Added a description to each part of cycle (Cycle, Working, Driving, Break, Resting)
    • Added a vertical line to divide a day from another
    • For enhanced assets was added the vehicle information, and for vehicles was added the enhanced asset information

      

• HoS Logbook

  • Adjustments and improvements:
    • Work events less than 5 minutes will not be shown
    • Work events for the entire selected day are displayed
    • Fixed trips that did not appear on the map
    • Fixed the full screen of the map
    • Fixed events not showing well centered on the map
    • The map will be shown when the entities are not selected
    • Breaks are shown if the entity was resting during the selected dates
    • When the entity exceeds its working time limit, it will show that the cycle is invalid.

Click here for prior release notes

• API

  • Reversegeo API
    • Fixed latitude, longitude with POI in reversegeo API. There was a POI that was not showing in the reversegeo request.
    • Added parameter ‘types’= id_collection, in reversegeo API. With this param the response will include geofences that are Points of Interest within the specified radius.
  • Suntech – Change the console command API endpoint to get a response
  • Updated the ;IX tag to receive embedded inputs and outputs from Syrus 4 and IOs Expander
  • Added new pegasus rawdata fields for ;IMU tag
  • Updated FWD:gauss_control #8578. The `start` field was changed to date type , example: “start”:”2019-08-21 16:20:02”.
  • Fixed all group logos that were no longer visible
  • Add option to ky to completely eliminate the automatic position requests that Pegasus makes as part of trips detection
  • Exposed a way to get the amount of triggers per entities  (Doc)
  • FWD wisetrackemsa: The `opcional_1` field will have the information converted to m/s^2 from `ac` field.
  • FWD gauss_control: In the `vehicleCode` field instead of the name, will be sent the license plate.
  • Third-Party Device Receiver
    • Teltonika – Integration of Fuel level for Escort RS232/RS485
    • Fixed teltonika fmc920 devices that was not reporting the battery level in Pegasus.
    • Lynx – Integrated remaining labels
  • Retransmitters
    • CMS
      • CMS DVR allows 4 videos
    • Jimi
      • Change ‘engine.ignition.status’ depending on whether the label is ignon/ignoff
    • Surfsight
      • Updated the Surfsight event list
      • Added ftgfoodrnk label for Food and Drink events.
    • Cipia
      • Created retransmitter for the Australia middleware

• Applications

  • Fixed Apps option. It was throwing an error when trying to access the Applications option.

• Geofence

  • Fixed speed limit unit when downloading the geofence/collection file. The speed limit unit corresponds with the user preference distance field #8589

• Organization

  • Fixed the average temp that was incorrect in Tracking and Accessories Module
  • Improvements to the online status of third-party devices that were shown online when they were in fact offline
  • Fixed visualization of group logos

• Reports

  • Temperature report migration and improvements. The Temperature Reports was renamed by “Temperature History”. The report allow more than one vehicle, filter by a temperature range, by analog input. Show temp1 to temp 10, humidity, input analogs.
    
    
    
  • Live Temperature Report now displays the vehicle selector on the left panel and the Live Temperature on the right.
  • Activity Details / Incidents Report – Added a new event for possible crash detection and trip-related information for events.
    
    
  • To fix the queuing and delay in generating reports, it is restricted that a user does not occupy the entire queue.
  • Added “Device Associations Report”. This report shows the device associations/disconnections historical.

    

  • Events Count Report – Fixed fatigue events that were not showing.
  • Fixed the error when copying the report by changing the scheduled params
  • Fixed some scheduled reports that were not received
  • Snapshot Report – Fixed some reports that could not be generated

Click here for prior release notes