Posts

ECU Monitor Firmware 2.9

ECU Monitor FW 2.9 Release Notes!

Improvements

  • Improved, OBDII protocol support for Hyundai vehicles.

Additions

  • Added, parameter to read the status of the seatbelt – for J1939 protocol only.
  • Added, parameter to read the status of the low lights – for J1939 protocol only.

Changed

  • Changed, the Gross Combination Weight [ID99] & Powered Vehicle Weight [ID98] are present on the ECU weights command – if the 13th and 14th axis of the parameter are not present
Important! If you’re upgrading the ECU Monitor from a Firmware previous to 2.1 please read the following 

>>Upgrading Procedure!

Make sure your Syrus 2 is upgraded to the firmware – 2.1.40 or above before proceding.
Syrus 2 Upgrade Command:

>SXAFU0C<

 

ECU Monitor Upgrade Command:

>SXAEM1ecu_29<


DCT Support

ECU Diagnostic Guides

There are new guides for diagnosing the ECU Monitor in J1939 / FMS & OBDII vehicles Diagnostic Guide for J1939 and FMS Diagnostic Guide for OBDII   Spanish Guides Guía Diagnostico para el J1939 & FMS Guía Diagnostico para el OBDII…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 2.8

ECU Monitor FW 2.8 Release Notes! Improvements Additions   Important! If you’re upgrading the ECU Monitor from a Firmware previous to 2.1 please read the following  >>Upgrading Procedure!   Make sure your Syrus 2 is upgraded to the firmware – 2.1.28 before proceding. Syrus 2 Upgrade Command: >SXAFU0C<   ECU Monitor Upgrade Command: >SXAEM1ecu_28<…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

ECU Monitor Firmware 2.1

ECU Monitor FW 2.1 Release Notes! Important! Before upgrading to this ECU FW version please read the  >>Upgrading Procedure! Corrections Improvements Additions…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here