Syrus 3 & CloudConnect Firmwares 3.4.54 (beta)
Notice
This firmware upgrade includes Firmware Plugins, this ONLY applies to clients that are not using Pegasus application, it means that certain interactions with some accessories are restricted unless you unlock it with the purchase of a firmware plugin. If you are a Pegasus Gateway user you don't need to worry about this notice. Please refer to the Firmware Plugins page for more information on these plugins.
Upgrade Commands
Syrus CC
>SXAFU1http://dctserver.com/otap/f/3w4e54/lite/;syrmag;3620afd5;<
Syrus CC Plus
>SXAFU1http://dctserver.com/otap/f/3w4e54/scc2/;syrmag;3620afd5;<
Syrus 3GLC
>SXAFU1http://dctserver.com/otap/f/3w4e54/3glc/;syrmag;3620afd5;<
Syrus 3
>SXAFU1http://dctserver.com/otap/f/3w4e54/std/;syrmag;3620afd5;<
Syrus 3GBT
>SXAFU1http://dctserver.com/otap/f/3w4e54/bt/;syrmag;3620afd5;<
*Upgrade all command:
>SXADUALL3w4e54,1.9.1.5,1.03<
*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).
Improvements
- Improved, the mechanism to trigger aggressive acceleration and hard braking signals, now they only depend on GPS data
- Adjusted, the values for throwing aggressive accelerations
- Improved, the udp task for receiving data
Corrections
- Fixed, total ECU runtime and engine reference torque parameters were returning not valid data
- Fixed, Analog expander was not consulted when IButton was enabled
- Fixed, VO jumps when unexpected resets happen
- Fixed, XAELP as action by event
Changes
- Changed, the source parameter for triggering the brake signal G47
Additions
- Added, ECU Brake switch parameter to throw G47 signal
- Added, ECU Engine fuel trip
- Added, ECU Engine fuel trip ZG extended tag
- Added, an instruction to clear jamming signals when GPRS connection is reached
- Added,a debug message for diagnosing wrong rpm values
- Added, F33 trip start signal
- Added, F34 trip stop signal