Syrus 3 & CloudConnect Firmwares 3.3.84

/in , /by

Upgrade Command >SXAFUGW< Upgrade all command (FW, Interface & Bluetooth) >SXADUALL3i3c84,1.9.1.1,1.03< Corrections Fixed, a reference time on i2c thread was causing bluetooth upgrade to fail. Fixed, the mechanism to auto start an upgrade when syrus interface is in boot mode. Fixed, a reference time on i2c thread was causing Input/Output expander to fail. Fixed, MDT…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.77

/in , /by

Upgrade Command >SXAFUGW< Important – Firmware 3.3.77 replaces firmwares 3.3.59 & 3.3.71, it is important that your devices are upgraded to this stable version, the changes between this release note and the previous one are detailed below in italics. After upgrading the Syrus firmware make sure to upgrade the microcontroller’s (interface) FW – see the…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.59

/in , /by

Upgrade Command: >SXAFUGW< This firmware is exclusively to Pegasus Gateway owners. Note – after upgrading the Syrus firmware make sure to upgrade the microcontroller’s fw – release notes Corrections Changes >SBIM2< – configure the Bluetooth interface in scanning mode Improvements >RXART;3.3.58;EHS6.T;IntVer=1.8.1.6T;IMSI=204043727725106,OpName=Movistar,SimId=89314404000068889089,;ID=< Additions 0: Dual mode. 1: Discoverable and connectable. In this mode the bluetooth device…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3 & CloudConnect Firmwares 3.3.55

/in /by

Upgrade Command: >SXAFUGW< This firmware is exclusively to Pegasus Gateway owners. Note – after upgrading the Syrus firmware make sure to upgrade the microcontroller’s fw – release notes Corrections Changes Improvements Additions…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G, 3G-BT, & CloudConnect Firmware 3.3.43

/in /by

Upgrade Command: >SXAFUGW< This firmware has Syrus firmware plugins enabled, please read more information about this on the following page. Note – after upgrading the Syrus firmware make sure to upgrade the microcontroller’s fw – release notes Corrections Changes Improvements Additions…

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G, 3G-BT, & CloudConnect Firmware 3.3.36

/in /by

Upgrade Command: >SXAFU0E< Corrections Changes >SXASMM1xyyyy< where: x, reserved yyyy, buffer size in bytes (Default 560bytes ~ 40 standard events). Range 0100 – 3000 bytes  (10 – 200 events) Improvements Additions XAPCR command permits the configuration of the input from which to count the pulses from >SXAPCR***2< for input 2 >SXAPCR***1< for input 1...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here

Syrus 3G, 3G-BT, & CloudConnect Firmware 3.3.25

/in /by

Upgrade Command: >SXAFU0E< Corrections Changes Improvements Additions Using the L option will tell the server not to acknowledge this event >SEDxxLV0;C00+< (This is only relevant when you configure the unit to use TCP or UDP + ACK) >SXAPSBxy< x is set to 0 to turn off the GPS module at runtime y is set to...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here