New Search

If you are not happy with the results below please do another search

Archive for category: Syrus 2 Firmware

11

Syrus 2 Firmware 2.1.64

/in

Corrections [list icon=”carat-1-e”] [item]Fixed, ECU speed, fuel and weight parameters were not correctly updated. These parameters could be updated with out of range values. [/item] [item]Fixed, sometimes the unit did not register on GPRS after ending power saving mode. A control timer to check GPRS register was added in order to restart the application when...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
12

Syrus 2 Firmware 2.1.48

/in

Corrections [list icon=”carat-1-e”] [item]Fixed, a Pulse Counter threshold that was not defined was triggering Pulse Counter signals Pxx[/item] [item]Fixed, ECU weights parameters were updated with wrong values. Values greater than 0xFB00 means that the weight value is not available.[/item] [/list] Changes [list icon=”carat-1-e”] [item]Changed, the time that the application can remain on Airplane mode from...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
13

Syrus Firmware 2.1.47

/in

Syrus 2 FW 2.1.47 has been officially released! Changes [list icon=”carat-1-e”] [item]Has a new feature that allows switching operators automatically after 5 minutes without registering GSM or GPRS as long as an M2M Cloud Connect SIM Card is detected. “This functionality could be turn on/off via Engineering Command”[/item] [/list] Improvements [list icon=”carat-1-e”] [item]Dedicated counters added...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
14

Syrus Firmware 2.1.41

/in

Syrus 2 FW 2.1.41 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, when Satcom mode is activated a not-valid-event is sent by Satcom[/item] [item]Fixed, sometimes the iButton id is not read correctly, this was reflected on the IB tag[/item] [item]Fixed, the unit does not wake up for time when Power Saving Mode ‘I’ is activated[/item]...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
15

Syrus Firmware 2.1.28

/in

Syrus 2 FW 2.1.28 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, transmission command for setting the MDT Mode back to normal[/item] [item]XAFP Query command did not return valid information[/item] [item]GPS Improvements on Driving Metric reports[/item] [/list] Improvements [list icon=”carat-1-e”] [item]Improved, communication with remote UDP servers that are added as URLs on the Destination Point[/item]...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
16

Syrus Firmware 2.1.20

/in

Syrus 2 FW 2.1.20 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, some ECU wrong values were reported due to incorrect data being analyzed.[/item] [item]Fixed, XAEM command returning wrong state when there’s no communication after an upgrade.[/item] [item]Fixed, valid gps events showed GPS source and age 90.[/item] [item]Fixed, mechanism that avoids the audio speaker rings...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
17

Syrus Firmware 2.1.05

/in

Syrus 2 FW 2.1.5 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, Garmin mode activation command did not return error if another serial mode was active.[/item] [item]Fixed, several photos were transmitted if a photo event included actions by event. (Only for serial camera mode 2).[/item] [item]Fixed, if checksum errors were detected the nmea sentences queue...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here
18

Syrus Firmware 2.0.60

/in

Syrus 2 FW 2.0.60 has been officially released! Corrections [list icon=”carat-1-e”] [item]Fixed, Wrong source and age were reported when the Modem RTC was restarted by no voltage conditions. Now GPS source and age are changed to 90.[/item] [item]Fixed, When the application starts, wrong values could be assigned to ecu variables if group 2 was read...

This content is for registered Members only. You can register for free!
Login to view this content, or Register here