Syrus 2 Firmware 2.3.53
UPGRADE COMMAND >SXAFU1http://dctserver.com/otap/f/2w3h53/std/;syrmag;3620afd5;< IMPROVEMENTS Improved communication with Technoton when it was programmed to send data automatically....
If you are not happy with the results below please do another search
UPGRADE COMMAND >SXAFU1http://dctserver.com/otap/f/2w3h53/std/;syrmag;3620afd5;< IMPROVEMENTS Improved communication with Technoton when it was programmed to send data automatically....
Note – this is a public beta release of the Syrus 2 FW. It’s purpose is to test the features mentioned below in its entirety, we welcome any feedback, please write to support@digitalcomtech.com.Upgrade Command:>SXAFU1http://dctserver.com/otap/f/2o3f52/std/;syrmag;3620afd5;<Corrections [list icon=”carat-1-e”] [item]Fixed, counter values were not increased on system resets, it caused the ;CE counter to return wrong values.[/item][/list]Improvements [list...
UPGRADE COMMAND>SXAFU1http://dctserver.com/otap/f/2p3j51/std/;syrmag;3620afd5;<ADDITIONSAdded, Wireless SIM card compatibility.APN: wireless.syrusgps.com ...
Upgrade Command >SXAFU1http://syrus.pegasusgateway.com/otap/f/2k3v50/std/;syrmag;3620afd5;< Corrections Fixed, GPS rollover issue An email was sent to all Support members with the following information: A small percentage of Syrus 2 devices were affected by the recent GPS Rollover, the symptoms of this are that the date indicated by the GPS is off, and the coordinates go to...
Note – this is a public beta release of the Syrus 2 FW. It’s purpose is to test the features mentioned below in its entirety, we welcome any feedback, please write to support@digitalcomtech.com. Upgrade Command: >SXAFU1http://dctserver.com/otap/f/2t3r48/std/;syrmag;3620afd5;< Corrections [list icon=”carat-1-e”] [item]Fixed, the method that calculates the average for analogue interface, it calculated the average when the...
Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes driving metrics were calculated with wrong speed values.[/item] [item]Fixed, the ECU monitor task did not read parameters if the application failed sending the ECU protocol command.[/item] [item]Fixed, wrong specific counter values were added to trips if the value was edited by taip command.[/item] [item]Fixed, the signals associated...
Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, ECU multiple error codes was returning wrong information. [/item] [item]Fixed, the SIM card was electrically restarted after system reset if the no-GSM time was reached. It caused the application to not start correctly when automated reset AR was configured.[/item] [item]Fixed, pulse counter was returning 0 when it was...
Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes a wrong time of day was delivered to trips after power saving mode.[/item] [item]Fixed, a trip was not ended when the vehicle was stopped without ignition off and without GPS.[/item] [item]Fixed, the OP tag was added in an extended event when DOP tag was configured.[/item] [item]Fixed, counters...
Upgrade Command: >SXAFU0C< Corrections [list icon=”carat-1-e”] [item]Fixed, Mobileye detection flag was not being set [/item] [item]Fixed, communication timeouts between Syrus and Garmin (error 82) [/item] [item]Fixed, GPS back log (XAKL) was returning the coordinates with wrong values, the latitude and longitude sign was changing [/item] [item]Fixed, Baudrate (XABR) command was being executed when an event was defined...
Corrections [list icon=”carat-1-e”] [item]Fixed, sometimes the pulse counter value was incremented by one during a system reset [/item] [item]Fixed, sometimes the GPS module jumps to the future. If this condition is detected a full cold start is executed [/item] [item]Fixed, sometimes the gps speed reported in EV frames while in MDT mode were inconsistent and reported...
email: support@digitalcomtech.com
slack: DCT Support Channel
chat: DCT Main Page
developer chat: Gitter
Thank you for Signing Up |
*Entering your email address in this form indicates that you agree to our Privacy Policy. You can withdraw your consent at any time.