-
Posts
-
-
SMS COMMANDS
To send commands to Syrus Lynx via SMS you can do so directly from Pegasus.
Go to Organization>SIM>search for the simcard then select: SMS COMMANDS tab.
Type in the command within the SMS field and click on the send botton once activated.
PEGASUS CONSOLE COMMANDS
To send commands to Syrus Lynx via Pegasus Console, you just need to add the suffix: send raw to the command you want or need to send (see picture below)
Syrus Lynx Commands
Replace cero 0 for a 3 to make Syrus Lynx respond via SMS
————————————————————————————————————-
AT+GTRTO=syrlynx,8,,3,,,,FFFF$ Query Firmware Version
AT+GTRTO=syrlynx,3,,0,,,,FFFF$ Reboot Lynx
AT+GTRTO=syrlynx,14,,0,,,,FFFF$ Delete Buffer
AT+GTRTO=syrlynx,1,,0,,,,FFFF$ Query position
AT+GTRTO=BTGIoT,6,,0,,,,FFFF$ Requests SIM’s ICCID
AT+GTRTO=syrlynx,F,,0,,,,FFFF$ Request Information Report
AT+GTRTO=syrlynx,7,,0,,,,FFFF$ Request RSSI Level
AT+GTRTO=syrlynx,2,BSI,0,,,,FFFF$ Query APN
AT+GTDOG=syrlynx,1,60,7,128,,1,0,0,60,120,240,FFFF$ Reinicio Automatico / 60 Min
For any additional questions, contact Support Team to: support@digitalcomtech.com
- This topic was modified 4 months, 2 weeks ago by .
- This topic was modified 3 months, 2 weeks ago by .
- This topic was modified 3 months, 2 weeks ago by .
- This topic was modified 3 months, 2 weeks ago by .
- This topic was modified 3 months, 2 weeks ago by .
- This topic was modified 3 months, 2 weeks ago by .
- This topic was modified 3 months, 2 weeks ago by .
- This topic was modified 4 days, 13 hours ago by .
- This topic was modified 4 days, 13 hours ago by .
-
- You must be logged in to reply to this topic.
