Standby Parameter Default Report and How to Change it

[Jose R.]

Standby Parameter Default Report

By default the Solar Powered Asset Tracker will report every 60 minutes (1 hr) when it is in standby mode:

Here is the default command:

MODE,2,30,3600,1,0,1,1,1#

30 = Reports every 30 seconds while in motion

3600 = Reports every 3600 seconds (1 hr) while Standby

 

How to Change Standby Parameter Report

Updating the Standby Parameter Report, is fairly easy, just update the parameter in the command with the value report you need it (value in seconds)

MODE,2,30,1800,1,0,1,1,1#

1800 = Reports every 1800 seconds (30 minutes) while Standby

 

[Author]

Posts