Syrus 3 & CloudConnect Firmwares (beta)

Notice

The firmware upgrades includes Firmware Plugins, this ONLY applies to clients that are not using Pegasus application, it means that certain interactions with some accessories are restricted unless you unlock it with the purchase of a firmware plugin.  If you are a Pegasus Gateway user you don’t need to worry about this notice. Please refer to the Firmware Plugins page for more information on these plugins.

Syrus 3 & CloudConnect Firmware 3.4.68

Upgrade Commands


Syrus CC (SL-1445)

>SXAFU1http://dctserver.com/otap/f/3q4e68/lite/;syrmag;3620afd5;<

Syrus CC Plus (SL-1645)

>SXAFU1http://dctserver.com/otap/f/3q4e68/scc2/;syrmag;3620afd5;<

Syrus 3GLC (SL3G-1645)

>SXAFU1http://dctserver.com/otap/f/3q4e68/3glc/;syrmag;3620afd5;<

Syrus 3G+ (S3G-2480)

>SXAFU1http://dctserver.com/otap/f/3q4e68/std/;syrmag;3620afd5;<

Syrus 3GBT (S3GBT-2481)

>SXAFU1http://dctserver.com/otap/f/3q4e68/bt/;syrmag;3620afd5;<

*Upgrade all commands:

>SXADUALL3q4e68,1.9.1.5,1.03<

*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Fixed

        • – Fixed , the offset in ecu temperature parameters

Additions

        • – Added, the transmission current gear parameter
        • – Added,  ECU current gear at the end of the ZS tag, position number 12, letter M in the manual
        • – Added, G49 signal for reporting changes on the ECU current gear parameter

Syrus 3 & CloudConnect Firmware 3.4.67

Upgrade Commands


Syrus CC (SL-1445)

>SXAFU1http://dctserver.com/otap/f/3p4f67/lite/;syrmag;3620afd5;<

Syrus CC Plus (SL-1645)

>SXAFU1http://dctserver.com/otap/f/3p4f67/scc2/;syrmag;3620afd5;<

Syrus 3GLC (SL3G-1645)

>SXAFU1http://dctserver.com/otap/f/3p4f67/3glc/;syrmag;3620afd5;<

Syrus 3G+ (S3G-2480)

>SXAFU1http://dctserver.com/otap/f/3p4f67/std/;syrmag;3620afd5;<

Syrus 3GBT (S3GBT-2481)

>SXAFU1http://dctserver.com/otap/f/3p4f67/bt/;syrmag;3620afd5;<

*Upgrade all commands:

>SXADUALL3p4f67,1.9.1.5,1.03<

*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Additions

        • – Added, ZJ extended tag for supporting the following ECU parameters:
          • Electric vehicle speed
          • Main position relay FLT
        • – Added, ZK extended tag for supporting the following ECU parameters:
          • Work status: Insulation detection status
          • Fault level of insulation detection
          • Positive insulation value
          • Negative insulation value
        • – Added, ZQ extended tag for supporting the following ECU parameters:
          • Rated capacity of battery
          • Rated voltage of battery
          • Rated total energy of battery
          • Maximum available voltage of battery pack
          • Minimum available voltage of battery pack
          • Maximum available temperature of battery pack
          • Minimum available temperature of battery pack
          • SOC: State of charge
          • SOH: State of health
          • Battery current
          • Voltage inside battery
          • Accumulated charged electric quantity
          • Accumulated discharged electric quantity
          • Single charged electric quantity

Syrus 3 & CloudConnect Firmware 3.4.66

Upgrade Commands


Syrus CC (SL-1445)

>SXAFU1http://dctserver.com/otap/f/3h4n66/lite/;syrmag;3620afd5;<

Syrus CC Plus (SL-1645)

>SXAFU1http://dctserver.com/otap/f/3h4n66/scc2/;syrmag;3620afd5;<

Syrus 3GLC (SL3G-1645)

>SXAFU1http://dctserver.com/otap/f/3h4n66/3glc/;syrmag;3620afd5;<

Syrus 3G+ (S3G-2480)

>SXAFU1http://dctserver.com/otap/f/3h4n66/std/;syrmag;3620afd5;<

Syrus 3GBT (S3GBT-2481)

>SXAFU1http://dctserver.com/otap/f/3h4n66/bt/;syrmag;3620afd5;<

*Upgrade all commands:

>SXADUALL3h4n66,1.9.1.5,1.03<

*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Corrections

        • Fixed, event message when serial photo capture mode was enabled

Syrus 3 & CloudConnect Firmware 3.4.65

Upgrade Commands


Syrus CC (SL-1445)

>SXAFU1http://dctserver.com/otap/f/3f4a65/lite/;syrmag;3620afd5;<

Syrus CC Plus (SL-1645)

>SXAFU1http://dctserver.com/otap/f/3f4a65/scc2/;syrmag;3620afd5;<

Syrus 3GLC (SL3G-1645)

>SXAFU1http://dctserver.com/otap/f/3f4a65/3glc/;syrmag;3620afd5;<

Syrus 3G+ (S3G-2480)

>SXAFU1http://dctserver.com/otap/f/3f4a65/std/;syrmag;3620afd5;<

Syrus 3GBT (S3GBT-2481)

>SXAFU1http://dctserver.com/otap/f/3f4a65/bt/;syrmag;3620afd5;<

*Upgrade all commands:

>SXADUALL3f4a65,1.9.1.5,1.03<

*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Corrections

        • Fixed, the G26 pulse counter signal was not being triggered when using the reference time mode

Improvements

        • Improved, the idle algorithm in order it to depends on rpm and speed

Additions

        • Added, a new field in the anti drift filter for configuring the VDOP as control parameterAdded,

For example:

        • >SXAEC::gps 9 1 150 1 3 1 8 62 150<, where:
        • 1: Ignition. It means the anti-drift filter will filter all the position frames when ignition off
        • 8: Acceleration. If acceleration is above of this limit, the gps will be restarted (It is an electrical reset)
        • 62: Max speed. If speed is above of this limit, the gps will be restarted (It is an electrical reset)
        • 150: Vdop threshold. By default is 999, it means the anti-drift filter will filter all the position frames when
          the value is above this reference.
        • Added, flow meter mode
        • Added, FM extended tag for reporting flow meter values  
        • Added, FM command to consult and configure flow meter mode and get values
        • Added, flow meter to the serial expander configuration command
        • Added, flow meter FD to the plugins

Syrus 3 & CloudConnect Firmware 3.4.61

Syrus CC (SL-1445)

>SXAFU1http://dctserver.com/otap/f/3f4u61/lite/;syrmag;3620afd5;<

Syrus CC Plus (SL-1645)

>SXAFU1http://dctserver.com/otap/f/3f4u61/scc2/;syrmag;3620afd5;<

Syrus 3GLC (SL3G-1645)

>SXAFU1http://dctserver.com/otap/f/3f4u61/3glc/;syrmag;3620afd5;<

Syrus 3G+ (S3G-2480)

>SXAFU1http://dctserver.com/otap/f/3f4u61/std/;syrmag;3620afd5;<

Syrus 3GBT (S3GBT-2481)

>SXAFU1http://dctserver.com/otap/f/3f4u61/bt/;syrmag;3620afd5;<

*Upgrade all commands:

>SXADUALL3f4u61,1.9.1.5,1.03<

*The upgrade all command is safe to send to any Syrus 3 device family from above, and automatically upgrades the Microcontroller & Bluetooth firmware (if necessary).

Corrections

        • Fixed, the mechanism for restarting the GPS, sometimes the gps task was left disabled after sending ::gps 7 command

Changes

        • Changed, the data structure for managing ECU TPMS doran data

Additions

        • Added, automatic detection of wireless and super sims
        • Added, ECU DID 134 Doran baseline tire pressure
        • Added, ZW9 ECU over pressure warning signal
        • Added, ZX0 ECU over pressure alert signal
        • Added, XAZB command for consulting Doran tire pressure baseline
        • Added, ZY extended tag for Doran Warnings
        • Added, 000 as default phone peer for receiving SMS
        • Added, XAZY command for consulting the Doran tires under warning state